ページ内を移動するためのリンクです。
Blended Foaming Agents Foaming Agents
Blended Foaming Agents’ Product Categories
Our blended foaming agents are designed to provide functionality to foamed materials and meet the diverse processing needs conventional foaming agents cannot.
These blended agents provide functional enhancements to foamed products and create bubble shapes that are impossible using conventional azodicarbonamide-based agents. We offer different grades of foaming agents optimized for our customer's ideal processing conditions: decomposition temperature, gas volume, etc.
Advantages
- Foaming temperature control; ability to process at a low temperature
- High degree of whiteness, produces stunning foamed surface
- Ability to control foaming magnification
Applications
- Low temperature foaming for decoration （wallpaper, leather）
- High whiteness, high magnification （decoration）
Blended foaming agents for PVC
|
Grade
|
Decomposition temp. (°C)
|
Gas volume(ml/g)
|
Characteristics |
Major Applications
|
|---|---|---|---|---|
| 541 | 145±5 | 130±5 | Low decomposition temperature | Wall paper, Floor materials |
| MF-7 | 140±2 | 140±10 | High surface whiteness | Leather, Wall paper and Floor materials |
| M10D | 189±3 | 210±10 | High surface whiteness | Leather, Wall paper |
| T-30 | 150±5 | 215±10 | High surface whiteness | Leather, Wall paper |
| W | 199±1 | 240±5 | High surface whiteness | Leather, Wall paper |
| M-1 | 148±5 | 210±5 | Low decomposition temperature, High surface whiteness | Leather, Wall paper |
| M-3 | 139±3 | 168±5 | Lower decomposition temp than M-1 | Leather, Wall paper |
| M-3W | 139±3 | 163±7 | High surface whiteness | Leather, Wall paper |
| MIX-T | 225±5 | 30±5 | Rigid PVC extrusion process | Extrusion foaming |
Blended foaming agents for PE , PP , PS
|
Grade
|
Decomposition temp. (°C)
|
Gas volume(ml/g)
|
Characteristics |
Major Applications
|
|---|---|---|---|---|
| 3NP | 168±3 | 170±10 | High surface whiteness | PE sheet, PS extrusion and injection foaming |
| B-520 | 160±10 | 125±10 | High expansion ratio | PS extrusion and injection foaming |
| M-35 | 150±3 | 170±10 | Fine foam cell structure | PE extrusion and injection foaming and PS injection foaming |
| NU-1I | 191±3 | 195±10 | Improve productivity | PE wire covering |
| CS-1 | 200±2 | 243±10 | Fine foam cell structure | PP extrusion foaming |
| Z015 | 190±3 | 200±10 | Fine foam cell structure, High whiteness | TPO leather |
